CB 1016-1982 船舶液压系统滤器和滤芯技术条件
作者:标准资料网 时间:2024-05-12 01:24:44 浏览:8647
来源:标准资料网
基本信息
标准名称: | 船舶液压系统滤器和滤芯技术条件 |
中标分类: |
船舶 >>
船舶管路附件 >>
船用液压、气动元件及附件 |
ICS分类: |
造船和海上建筑物 >>
船舶和海上建筑物综合 >>
造船用材料和零件
|
发布日期: | 1983-02-01 |
实施日期: | 1983-12-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
出版日期: | 1900-01-01 |
页数: | 10页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 船舶 船舶管路附件 船用液压 气动元件及附件 造船和海上建筑物 船舶和海上建筑物综合 造船用材料和零件
基本信息
标准名称: | 风力发电机组偏航系统 第1部分:技术条件 |
英文名称: | Yaw system of wind turbine generator systems Part1:Techology condition |
中标分类: |
能源、核技术 >>
能源 >>
风能 |
ICS分类: |
能源和热传导工程 >>
风力发电系统和其
|
发布部门: | 中华人民共和国国家发展和改革委员会 |
发布日期: | 2004-02-10 |
实施日期: | 2004-06-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
提出单位: | 中国机械工业联合会 |
归口单位: | 全国风力机械标委会 |
起草单位: | 一拖一美德(洛阳)风电设备有限公司 |
起草人: | 王宏平、杜广平 |
出版社: | 机械工业出版社 |
出版日期: | 2004-05-30 |
页数: | 9页 |
批文号: | 发改委2004-9 |
书号: | 15111.7283 |
适用范围
本部分规定了并网型风力发电机组偏航系统的主要型式、基本参数、技术要求、检验项目与规则、标志和包装运输等基本要求。本标准适用于水平轴式并网型风力发电机组偏航系统。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 能源 核技术 能源 风能 能源和热传导工程 风力发电系统和其
【英文标准名称】:StandardSpecificationforZinc(Hot-DipGalvanized)CoatingsonIronandSteelProducts
【原文标准名称】:镀锌(热浸镀锌)钢铁产品的标准规范
【标准号】:ASTMA123/A123M-2009
【标准状态】:现行
【国别】:
【发布日期】:2009
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:A05.13
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:镀层&x2014;锌;镀锌;钢产品&x2014;金属镀层;锌镀层&x2014;钢产品;热浸镀锌层.规范;钢铸件.规范;钢制五金.锌镀层;钢板(镀锌的);钢带.镀锌层;蜡涂层.规范;镀锌钢板.规范;镀锌涂层.规范
【英文主题词】:coatings&x2014;zinc;galvanizedcoatings;steelproducts&x2014;metalliccoated;zinccoatings&x2014;steelproducts,Galvanizedmaterials/structures/surfaces--specifi
【摘要】:1.1Thisspecificationcoverstherequirementsforzinccoating(galvanizing)bythehot-dipprocessonironandsteelproductsmadefromrolledpressedandforgedshapes,castings,plates,bars,andstrips.1.2Thisspecificationcoversbothunfabricatedproductsandfabricatedproducts,forexample,assembledsteelproducts,structuralsteelfabrications,largetubesalreadybentorweldedbeforegalvanizing,andwireworkfabricatedfromuncoatedsteelwire.Thisspecificationalsocoverssteelforgingsandironcastingsincorporatedintopiecesfabricatedbeforegalvanizingorwhicharetoolargetobecentrifuged(orotherwisehandledtoremoveexcessgalvanizingbathmetal).Note18212;ThisspecificationcoversthoseproductspreviouslyaddressedinSpecificationsA123-78andA386-78.1.3Thisspecificationdoesnotapplytowire,pipe,tube,orsteelsheetwhichisgalvanizedonspecializedorcontinuouslines,ortosteellessthan22gage(0.0299in.)[0.76mm]thick.1.4Thegalvanizingofhardwareitemsthataretobecentrifugedorotherwisehandledtoremoveexcesszinc(suchasboltsandsimilarthreadedfasteners,castingsandrolled,pressedandforgeditems)shallbeinaccordancewithSpecificationA153/A153M.1.5Fabricatedreinforcingsteelbarassembliesarecoveredbythepresentspecification.ThegalvanizingofseparatereinforcingsteelbarsshallbeinaccordancewithSpecificationA767/A767M.1.6Thisspecificationisapplicabletoordersineitherinch-poundunits(asA123)orSIunits(asA123M).Inch-poundunitsandSIunitsarenotnecessarilyexactequivalents.Withinthetextofthisspecificationandwhereappropriate,SIunitsareshowninparentheses.Eachsystemshallbeusedindependentlyoftheotherwithoutcombiningvaluesinanyway.InthecaseofordersinSIunits,alltestingandinspectionshallbedoneusingthemetricequivalentofthetestorinspectionmethodasappropriate.InthecaseofordersinSIunits,suchshallbestatedtothegalvanizerwhentheorderisplaced.
【中国标准分类号】:H40
【国际标准分类号】:25_220_40
【页数】:8P.;A4
【正文语种】: